- Whatsapp:+44 752 1063559
- Email Us: felix@vatocare.com
The Aluminum Alloy Anti-Fall Walker provides stable support for those with unsteady gaits, older adults, and individuals in rehabilitation. Its frame uses aluminum alloy, offering a balance of strength and lighter weight for easier handling. Users can rely on it for walking support, gait training, and everyday outings. The walker suits home care, senior living spaces, rehab settings, and similar public areas. Before each use, confirm the unit stands level, all connections are tight, and any adjustment points are locked. Leave enough clearance for sitting, standing, or turning. Choose a size based on the user’s body type, activity level, and surrounding space. Keep contact surfaces clean and dry after use.
The walker and rollator VT1-WR-012 is designed for practical daily care. It balances user support, operating convenience and routine caregiver efficiency. The configuration and materials shown in the specification table are matched to this product; select the final size and configuration for the user’s body dimensions, mobility, care needs and available space.
Before first use, place the product on a suitable, level surface and check every connection, lock, adjustment point, folding joint and brake or support component. The user should approach or transfer slowly while maintaining a stable posture. A caregiver should assist whenever balance, strength or coordination is limited. This product is a daily-care aid and does not replace medical assessment or a prescribed rehabilitation plan.
For ongoing use, keep contact surfaces clean and dry, inspect fasteners and moving parts at regular intervals, and stop using the product if any component becomes loose, damaged or unstable. Packaging dimensions and weights in the table are supplied for storage, shipping and receiving planning; actual batch labels and the selected configuration take precedence.
| Specification | Details |
|---|---|
| Product Name | Aluminum Alloy Anti-Fall Walker |
| Product Category | Walker and Rollator |
| Seat Height | 47~62cm |
| Folding Dimensions（Specification1） | 59×9.5×78.5cm |
| Folding Dimensions（Specification2） | 67x12x79cm |
| Main Frame Material | Aluminum Alloy |
| Net Weight（Specification1） | 2.16kg |
| Net Weight（Specification2） | 2.48kg |
| Adjustment Levels（Specification1） | 7 |
| Adjustment Levels（Specification2） | 7 |
| Material | /Aluminum Alloy |
| Dimensions | 77 |
| Additional Specification | 61 |
This walker is intended for walking support, gait training, and daily outings. It can be configured for use in homes, elderly care institutions, rehabilitation centers, nursing spaces, or relevant public facilities. For individuals with unsteady gait, elderly users, and those in rehabilitation, usage should be determined based on physical condition—either independently or with caregiver assistance. Initial use requires adjustment of height, angle, position, or support method. The usage area should be flat, dry, and unobstructed, free of items that hinder operation or passage. In bathrooms, toilets, or moving scenarios, special attention to anti-slip measures and stability is required. As a walking aid, this product provides daily assistance and support only; it does not replace medical diagnosis, professional rehabilitation programs, or procedures that must be performed by healthcare personnel.
It is made for people with unsteady walking patterns, older adults, and those doing gait rehabilitation. The final decision depends on the user’s body size, physical strength, balance, and whether a caregiver can assist.
Measure the user’s height and arm length, then check the width of doorways, beds, toilets, hallways, and storage areas. Compare those numbers with the walker’s overall size and adjustment range.
Only if the person has enough balance and arm strength. If the user feels unsteady or has limited mobility, a family member or caregiver should provide full assistance during use.
Confirm the walker sits level on the ground. Check that all connection points, locking mechanisms, height adjustments, folding joints, and brake parts are in the correct and secure position.
The main material is aluminum alloy. Use a soft cloth with mild soap and water to wipe the frame and grips. Dry everything completely afterward. Do not use bleach, strong solvents, or abrasive pads.
