- Whatsapp:+44 752 1063559
- Email Us: felix@vatocare.com
The Aluminum Alloy Walker with Commode Bucket is built from aluminum alloy, offering a sturdy yet manageable structure for indoor home care, nursing spaces, and recovery settings. Users should check stability, connections, and adjustments before each use, and keep the walking area flat, dry, and clear. The product serves as an assistive device, not a substitute for professional medical care.
The walker and rollator VT3-WR-020 is designed for practical daily care. It balances user support, operating convenience and routine caregiver efficiency. The configuration and materials shown in the specification table are matched to this product; select the final size and configuration for the user’s body dimensions, mobility, care needs and available space.
Before first use, place the product on a suitable, level surface and check every connection, lock, adjustment point, folding joint and brake or support component. The user should approach or transfer slowly while maintaining a stable posture. A caregiver should assist whenever balance, strength or coordination is limited. This product is a daily-care aid and does not replace medical assessment or a prescribed rehabilitation plan.
For ongoing use, keep contact surfaces clean and dry, inspect fasteners and moving parts at regular intervals, and stop using the product if any component becomes loose, damaged or unstable. Packaging dimensions and weights in the table are supplied for storage, shipping and receiving planning; actual batch labels and the selected configuration take precedence.
| Specification | Details |
|---|---|
| Product Name | Aluminum Alloy Walker with Commode Bucket |
| Product Category | Walker and Rollator |
| Material | Aluminum Alloy |
| Dimensions | 57*51*53cm |
| Additional Specification | 53–101cm |
| Package Dimensions | F × F × 57 cm |
| Package Weight | 53 g（ 0.053 kg） |
The Vatocare aluminum alloy walker with commode is suitable for walking support, gait training, and daily outings. It can be configured as needed in homes, elderly care institutions, rehabilitation centers, nursing spaces, or relevant public facilities. For individuals with unsteady gait, elderly users, and those in rehabilitation training, use should be determined as independent or caregiver-assisted based on physical condition. Height, angle, position, or support method adjustments should be completed during first use. The usage area should be flat, dry, and unobstructed, with items that could interfere with operation or passage kept away. In bathroom, toilet, or mobility scenarios, special attention should be paid to slip resistance and stability. As a walking aid, the product provides daily assistance and support and cannot replace medical diagnosis, professional rehabilitation programs, or procedures that must be performed by healthcare personnel.
It is intended for unsteady walkers, older adults, and people in rehabilitation. Final suitability depends on the user’s body size, strength, balance, and available caregiver assistance.
Measure the user’s body dimensions and check the clearances of doorways, beds, toilets, corridors, and storage spots where the walker will be used or parked.
It depends on individual mobility. If balance or strength is insufficient, a family member or caregiver must provide full assistance during standing, walking, and turning.
Confirm the walker stands level on the ground, all connectors and locks are tight, and any folding, lifting, or braking components are in the correct working position.
Since the main material is aluminum alloy, clean contact surfaces with a gentle method, wipe dry afterward, and avoid corrosive or abrasive cleaning agents.
Compare load capacity, dimensions, seat height, adjustment range, movement method, and packaging details against the intended walking support, training, and outings. The final size should match the user’s body and the actual home or facility space.
