- Whatsapp:+44 752 1063559
- Email Us: felix@vatocare.com
The Anti-Slip Toilet Grab Bar is built from high-carbon steel with a durable aluminum alloy finish, offering reliable stability for users with limited lower-limb strength, seniors, and those recovering from surgery. The bar is designed for household bathrooms, elder care facilities, rehabilitation spaces, and similar public settings. Users must confirm that the bar is firmly mounted and that the surrounding area allows enough room for safe movement. This product supports daily routines but does not replace medical care or professional rehabilitation plans.
The toilet safety rail VT1-TSR-007 is designed for practical daily care. It balances user support, operating convenience and routine caregiver efficiency. The configuration and materials shown in the specification table are matched to this product; select the final size and configuration for the user’s body dimensions, mobility, care needs and available space.
Before first use, place the product on a suitable, level surface and check every connection, lock, adjustment point, folding joint and brake or support component. The user should approach or transfer slowly while maintaining a stable posture. A caregiver should assist whenever balance, strength or coordination is limited. This product is a daily-care aid and does not replace medical assessment or a prescribed rehabilitation plan.
For ongoing use, keep contact surfaces clean and dry, inspect fasteners and moving parts at regular intervals, and stop using the product if any component becomes loose, damaged or unstable. Packaging dimensions and weights in the table are supplied for storage, shipping and receiving planning; actual batch labels and the selected configuration take precedence.
| Specification | Details |
|---|---|
| Product Name | Anti-Slip Toilet Grab Bar |
| Product Category | Toilet Safety Rail |
| Overall Length | 13cm |
| Overall Width | 55.5~74cm |
| Net Weight | 4.5kg |
| Load Capacity | 200 |
| Main Frame Material | High-Carbon Steel |
| Carton Quantity | 1 |
The Vatocare anti-slip toilet safety is intended for toilet sit-to-stand support, bathroom bracing, and fall prevention assistance. It can be configured for use in private homes, elderly care institutions, rehabilitation centers, nursing spaces, or appropriate public facilities. For individuals with lower limb weakness, elderly users, and post-operative patients, usage should be determined based on physical condition—either independently or with caregiver assistance—and initial setup should include adjustment of height, angle, position, or support method. The usage area must remain level, dry, and unobstructed, with no items stored nearby that could interfere with operation or passage. In bathroom or shower contexts, special attention to slip resistance and stability is required. As a toilet safety, this product provides daily assistance and support only; it does not replace medical diagnosis, professional rehabilitation protocols, or procedures that must be performed by healthcare personnel.
It is designed for people with weak lower limbs, elderly individuals, and those recovering from surgery. Final suitability depends on the user’s body size, strength, balance, and available caregiver support.
Measure the user’s height and arm reach, then check the wall space beside the toilet, the distance from the floor to the mounting area, and the clearance needed for turning or stepping.
That depends on the person’s mobility and balance. If the user cannot stand or sit steadily on their own, a caregiver should always be present to assist during transfers.
Confirm that the wall bracket is firmly attached, the bar is level, all screws are tight, and there is no visible damage or rust. Also ensure the surrounding floor is dry and free of trip hazards.
Use a soft cloth with mild soap and water to wipe the bar, then dry it completely. Periodically tighten the mounting screws and check the surface for scratches or corrosion. Do not use bleach or abrasive pads.
