- Whatsapp:+44 752 1063559
- Email Us: felix@vatocare.com
The Hemiplegic Pediatric Tilt Standing Frame is a walker-style support device built for children with hemiplegia, as well as for older adults and individuals undergoing gait rehabilitation. Its primary frame is made of aluminum alloy, offering a lightweight yet sturdy structure for daily walking support, balance training, and assisted mobility outside the home. The device is designed for use in family care settings, nursing homes, rehab centers, and similar public spaces, with adjustable support positions to match the user’s body size and ability. Before each use, caregivers must confirm the frame is level, all joints and locks are secure, and enough clearance exists for sitting, standing, or turning. This product provides physical assistance only—it does not replace medical diagnosis or professional therapy.
The walker and rollator VT6-WR-068 is designed for practical daily care. It balances user support, operating convenience and routine caregiver efficiency. The configuration and materials shown in the specification table are matched to this product; select the final size and configuration for the user’s body dimensions, mobility, care needs and available space.
Before first use, place the product on a suitable, level surface and check every connection, lock, adjustment point, folding joint and brake or support component. The user should approach or transfer slowly while maintaining a stable posture. A caregiver should assist whenever balance, strength or coordination is limited. This product is a daily-care aid and does not replace medical assessment or a prescribed rehabilitation plan.
For ongoing use, keep contact surfaces clean and dry, inspect fasteners and moving parts at regular intervals, and stop using the product if any component becomes loose, damaged or unstable. Packaging dimensions and weights in the table are supplied for storage, shipping and receiving planning; actual batch labels and the selected configuration take precedence.
| Specification | Details |
|---|---|
| Product Name | Hemiplegic Pediatric Tilt Standing Frame |
| Product Category | Walker and Rollator |
| Load Capacity | 75kg |
| Net Weight | 16kg |
| Gross Weight | 18.5kg |
| Material | ++P U+ |
| Material | Aluminum Alloy |
| Carton Quantity | 1 |
| Package Dimensions | 90 × 63 × 17 cm |
| Package Weight | 19 g（ 0.019 kg） |
| Package Dimensions2 | 106 × 63 × 17 cm |
| Package Weight2 | 22 g（ 0.022 kg） |
Vatocare tilt standing frame for children with hemiplegia is intended for walking support, gait training, and daily outings. It can be configured for use in homes, elderly care institutions, rehabilitation centers, nursing spaces, or appropriate public facilities. For individuals with unsteady gait, elderly users, and rehabilitation trainees, the decision to use the device independently or with caregiver assistance should be based on physical condition. During first use, height, angle, position, or support method adjustments should be completed. The usage area should be flat, dry, and unobstructed, with no items piled nearby that could interfere with operation or passage. In bathroom, toilet, or transfer scenarios, special attention should be paid to slip resistance and stability.
The parameter table does not list a specific weight limit, so you must verify the load capacity with the final specification sheet or the label on the actual unit before purchase.
Yes, but only if the carpet is firm and level. Soft or thick carpet may cause the frame to sink unevenly, so place a rigid board under the base or choose a hard floor for all training sessions.
Start at the most upright position that still lets the child bear weight through their legs, then increase the tilt by small increments over several days. Always recheck the locking pins after each change.
No—the design provides trunk and lower limb support but does not include a headrest or neck support. A child lacking stable head control needs additional head positioning equipment.
Wipe it dry after each use and inspect all screw joints monthly. If you see white corrosion spots or scratches exposing raw metal, apply a clear protective coating to prevent further oxidation.
