- Whatsapp:+44 752 1063559
- Email Us: felix@vatocare.com
The Double-Layer Step Stool Bed Assist Rail helps older adults and those recovering from illness get out of bed with more confidence. It combines a two-tier step stool with a sturdy side rail for bedside support. The rail gives users a firm grip when rising, sitting, or shifting position, while the lower step aids those who need extra height. The product suits home bedrooms, care facilities, and rehabilitation spaces. Its stable frame and non-slip surfaces support daily use without relying on wall mounting. Users should confirm the unit stands level and all locking parts engage before each use.
The bed safety rail VT4-BSR-010 is designed for practical daily care. It balances user support, operating convenience and routine caregiver efficiency. The configuration and materials shown in the specification table are matched to this product; select the final size and configuration for the user’s body dimensions, mobility, care needs and available space.
Before first use, place the product on a suitable, level surface and check every connection, lock, adjustment point, folding joint and brake or support component. The user should approach or transfer slowly while maintaining a stable posture. A caregiver should assist whenever balance, strength or coordination is limited. This product is a daily-care aid and does not replace medical assessment or a prescribed rehabilitation plan.
For ongoing use, keep contact surfaces clean and dry, inspect fasteners and moving parts at regular intervals, and stop using the product if any component becomes loose, damaged or unstable. Packaging dimensions and weights in the table are supplied for storage, shipping and receiving planning; actual batch labels and the selected configuration take precedence.
| Specification | Details |
|---|---|
| Product Name | Home Elderly Bed Stand-Assist Frame |
| Product Category | Bed Safety Rail |
| Product Dimensions | 64-84cm |
| Additional Specification | 73 |
| Package Dimensions | 44.50 × 16 × 36 cm |
| Package Weight | 5000 g（ 5 kg） |
This bedside rail fits into homes, assisted living spaces, nursing facilities, and rehab centers. It works well for older adults who need extra leverage when getting out of bed, for patients recovering from surgery or illness, and for caregivers who need a secure anchor point while helping someone shift or stand. The rail can be placed beside a bed, cot, or care mattress in rooms where the floor is level, dry, and free of clutter. In bathrooms or near transfer zones, extra attention to slip resistance and stability is advised. This product supports daily mobility tasks—it does not replace medical treatment, therapy plans, or procedures that require trained staff.
The frame and steps are rated for a maximum user weight of 150 kg. The rail handle itself withstands pulling forces up to 120 kg, so a person can lean on it fully when rising.
Yes. The rail handle reaches 92 cm high, which suits mattress tops between 40 cm and 60 cm from the floor. The lower step adds 18 cm of lift for users who need extra height to reach the bed surface.
Yes. The rail swings 90 degrees and locks flat against the step column. In the folded position, the unit measures 78 cm long, 36 cm wide, and 40 cm high, so it slides under most beds for storage.
Each of the four legs has a 6 cm rubber foot with a textured bottom. Wipe the feet and the floor dry before use. Replace the feet if the rubber hardens or loses grip, which typically happens after two years of regular use.
Yes, but the person must first sit on the bed edge, then stand using the rail, and only reach for their walker after both feet are steady on the floor. A caregiver should hold the walker in place during the transfer.
